|Year : 2015 | Volume
| Issue : 3 | Page : 57-63
A brief review of the methods used to determine the curvature of root canals
Pooja Balani1, Fayez Niazi2, Haroon Rashid3
1 Department of Conservative Dentistry, College of Dentistry, Ziauddin University, Karachi, Pakistan
2 Department of Oral Biology, College of Dentistry, Ziauddin University, Karachi, Pakistan
3 Department of Fixed and Removable Prosthodontics, College of Dentistry, Ziauddin University, Karachi, Pakistan
|Date of Web Publication||30-Oct-2015|
Dr. Haroon Rashid
College of Dentistry, Ziauddin University, Karachi
Source of Support: None, Conflict of Interest: None
Successful endodontic therapy is largely dependent on a triad of access cavity, canal preparation, and three-dimensional hermetically sealed obturation of the canals. Canal preparation is the most vital part of the triad that can be very challenging due to the complex morphology of the root canal system. Clinicians quite frequently encounter severe canal curvatures of different degrees within the roots that lead to a variety of problems including ledge formation, separation of instruments, canal blockage, and tear-drop transportation at the apex or perforation. Anatomical variations within the complex root canal morphology are the commonest cause of endodontic treatment failure. It is, therefore, essential to have a thorough knowledge about the internal and external morphologies of teeth. The aim of the current paper is to review the methods used to determine the root canal curvature and its management.
Keywords: Canal blockage, curved canals, root canal curvature, root canal morphology
|How to cite this article:|
Balani P, Niazi F, Rashid H. A brief review of the methods used to determine the curvature of root canals. J Res Dent 2015;3:57-63
|How to cite this URL:|
Balani P, Niazi F, Rashid H. A brief review of the methods used to determine the curvature of root canals. J Res Dent [serial online] 2015 [cited 2020 Feb 23];3:57-63. Available from: http://www.jresdent.org/text.asp?2015/3/3/57/168733
| Introduction|| |
The main purpose of endodontic therapy is to treat diseased (vital or necrotic) dental pulp so that the function and appearance of the treated natural tooth can be maintained. The therapy involves the removal of diseased dental pulpal tissue, preparing the root canals along with proper irrigation solutions, and then sealing them subsequently using an inert filling material. Once the canals are sealed, a coronal seal must be provided so that bacterial ingress from the coronal portion may be prohibited. The literature states that an ideal canal preparation is one in which the original canal morphology is maintained during the preparation procedure, along with the flare taper shape from the coronal to the apical region and thus, preserving the apical foramen. This, however, may not be always possible due to the complexity of the root canal morphology. Common challenges that endodontists usually encounter during endodontic therapy are:
- Accessing all the canals without encountering a procedural error
- Maintaining the adequate working length and obturating the canal to its full working length
- Preparing the canals by maintaining the adequate size and geometries of canals in all directions.
Unfortunately, the root canal morphology is not always as straight and simple as it appears on the radiographs. Various curves are present along the length of the canal and the preparation of these curved root canals becomes very challenging for a clinician. These curved canals may also restrict the mechanical and chemical preparation of the curvature or may lead to some procedural errors affecting the prognosis. The classification of root canal curvatures is enumerated in [Table 1]. Preoperative assessment of the root canal morphology is thus necessary so that the complexity, the degree of curvature, and radius of the root canals are determined to an extent. This will significantly reduce the occurrence of the procedural errors and the excess removal of tooth structure from the inner curvature, resulting in stripping or zip formation.,
In the past few decades, only the angle of the canal curvature was the focus for categorizing the root canal morphology and the curvature. The canal was classified as either straight (if the angle was 5° or less), moderately curved (if the angle was 10-20°), or severely curved (if the angle was >20°). Later, it was proposed that the degree, position, and severity of the canal curvature also play an important role.
Also, it is also important to choose the correct instruments and instrumentation techniques as the final outcome of endodontic treatment in curved canals depends largely on the flexibility of the instruments used, diameter of the instrument, and technique of the instrumentation. The common challenge that a practitioner may encounter during the treatment of complex canals are:
- Negotiating the root canal curvature
- Enlarging the canal space by maintaining the original internal anatomy of the canal
- Creating a taper-shaped canal to optimize irrigation and obturation.
| Determining the Root Canal Curvature|| |
Curvature of the root canal system should be determined preoperatively to avoid procedural errors and subsequent treatment failure. The following methods can be used for root canal curvature determination:
These can be used to assess the root curvature but may lead to misinterpretation since the radiographs produce a two-dimensional image of a three-dimensional object  and thus, curvatures that are present buccolingually may not be visible. The majority of the canals do have some curvature on the different planes and thus, it is not possible to demonstrate them solely on the basis of radiographs.
Cone beam computed tomography
CBCT is a new advancement in the field of radiology as described by Atria et al. and Moshiri et al., and is specifically used for detailed three-dimensional imaging of oral and maxillofacial structures. The technique reduces the incidence of false negative results as it overcomes the limitations of the conventional radiograph such as image distortion, anatomic superimposition, and the compression of three-dimensional objects into two-dimensional images. CBCT helps in assessing the true size, extent, nature, and position of the lesions as compared to conventional radiography, that is, periapical radiographs or orthopantomogram (OPG). Periapical pathology can be detected sooner as compared to other radiological approaches, as the lesions that are present in the cancellous bone can only be detected using CBCT. CBCT can be divided into large, medium, and small limited units based on the size of the field of view (describing the scan volume of CBCT machine), and depends on the detector size and shape, beam projection geometry, and ability to collimate the beam. Unlike medial computed tomography (CT) scanner that has fan-shaped beam of x-rays, CBCT projects pyramid- or cone-shaped x-ray beam. The position of the patient depends on the manufacturer of the system and he/she can be in a supine, standing, or sitting position and the x-ray source and scanner makes a complete or half-rotation around the patient's head to capture the field of view. The images are then visualized using computer software at different anatomic planes.
The radiation dose of the CBCT is much less than the medical scanner or conventional radiograph. The effective dose of one CBCT unit is equivalent to the dose of two or three standard periapical radiographic exposures. CBCT provides a better view of root canal morphology as compared to radiographs. For example, the buccolingual curvatures that are missed in radiographs can be seen in a CBCT image.
The radius of root curvature can be determined through CBCT measured by the circumcenter using Planimp software (CDT Informatics, Cuiabá, MT, Brazil, 3D imaging system) based on the three mathematical points. Two semi-straight lines of 6 mm are drawn and the midpoint of the lines is determined. Perpendicular lines from the midpoint of each primary semi straight lines are drawn until they meet at a central point that is termed the circumcenter. The distance between the circumcenter and the midpoint of each semi-straight line will actually determine the magnitude of the canal curvature. The smaller the radius, the greater the curvature and thus more complex the root canal structure.
According to this method, curvature can be classified as:
- Small radius (r < 4 mm): Severe curvature
- Intermediary radius (r > 4 and r < 8 mm): Moderate curve
- Large radius (r > 8 mm): Mild radius.
Using this method, a mid-point is marked on the file at the level of the canal orifice. A straight line is drawn parallel to the image and that point is labeled as point A. Another second point is marked where the flare starts to deviate that is labeled point B. A third point is marked at the apical foramen and is termed point C and the angle formed by the intersection of these lines is measured [Figure 1]. If the angle is less than 5°, the canal is straight; if the angle is 5-20°, the canal is moderately curved; and if the angle is greater than 20°, the canal is classified as a severely curved canal.,
Lutein et al. modified Schneider's method by using two lines drawn by the identification of four geometric points. Point A is first marked at the center of the canal orifices and then point B is marked 2 mm below the orifices in the long axis of the canal. A first primary line is drawn joining point A and point B and then point C is marked 1 mm coronal to the apical foramen. Point D is marked at the apical foramen then a second primary line is drawn joining these two lines [Figure 2]. The angle formed by intersection of the two lines is measured as in the Schneider method.
Cunningham's and Senia's method
This approach is different as it focuses on multiple root curvatures, that is, S-shaped canals, and the angle is measured separately at the coronal and apical ends. Point A is first drawn at the center of the orifices and then Point B is marked where the deviation or curve of the canal starts and a line is drawn joining these two lines. Point C is then marked where the canal again changes its direction or the deviation starts and point C is joined with point B. Point D is finally marked at the apical area and joined with point C [Figure 3].
|Figure 3: Diagrammatic representation of Cunningham's and Senia's method|
Click here to view
The angle formed by the intersection of lines through points A and B and then points B and C is named angle X while the angle formed by the intersection of lines through points B and C and points C and D is named angle Y.
Weine  described another method for the determination of root canal curvature similar to Schneider's method [Figure 4] but showed the differences in the angles according to curvature of the canal. In this method, a straight line is drawn from the canal orifices to the point of curvature and a second line is drawn from the apex for the apical curvature and the angle is measured at the point of intersection between the two lines.
| Determining the Horizontal Dimension|| |
Determining the horizontal dimension of the root canal is one of the challenging factors since the horizontal dimension varies at different vertical dimensions. These dimensions are often known as the "forgotten dimension" as very few studies have been carried out for determining the horizontal dimension.
The classification of root canal according to horizontal dimension is as follows:
- Round (the maximum initial working width is equal to the minimum initial working width)
- Oval (the maximum initial working width is up to two times greater than the minimum initial working width)
- Long oval (the maximum initial working width is up to four times more than the minimum initial working width)
- Flattened (the maximum initial working width is more than four times greater than the minimum initial working width)
- Irregular (cannot be defined by any of the above types); to maintain the horizontal dimension at different levels of the root canal, circumferential filing should be used to prepare the canal.
| Management of Root Curvatures|| |
Managing apical curvatures
The tooth at the apical third area is mostly curved and it is important to state that an attempt to straighten it should not be made or else treatment failure may be the outcome due to direct perforation, formation of ledges, and creation of teardrop foramen or foraminal rip.
To avoid these misfortunes, it is highly recommended that a straight line access is gained into the canals. The preparation can then be started using a smaller diameter K file such as #08 or #10. These smaller diameter files can also be precurved in the direction of the apical curvature. A chelating agent such as ethylenediaminetetraacetic acid (EDTA) must be used, along with copious irrigation of the canals with sodium hypochlorite, and once a file is withdrawn from the canal, it must be cleaned and recurved before it is reintroduced. Segal  suggested that a reamer should be used instead of K-file since it is more flexible in nature and provides a perfect mirror appearance of the canal curvature. Once removed, it describes the degree, type, location, and direction of the curvature. However, due to its flexibility it may also lead to canal transportation.
Once an access cavity is prepared, the root canal preparation should be started with stainless steel files of smaller diameter with light passive movement to debride the pulpal tissues and negotiate the apical area. Stainless steel files with a larger diameter must be avoided as they may alter the actual internal anatomy of the canal. The diameter of the glide path is then increased with nickel-titanium (NiTi) hand files before the preparation of the canal with rotary NiTi file., NiTi rotary files are flexible and very promising; however, multiple curves in the canals may cause strain in these instruments leading to instrument separation or ledge formation.
Managing middle curvatures
Mid-canal curvatures are relatively difficult to handle, especially if the coronal third of the root is straight and if this is not adequately dealt with, it may lead to iatrogenic errors such as file separation, perforations, ledge formation, and blockage of canals decreasing the prognosis of the tooth. The relationship between the degree of curvature and incidence of ledge formation is enumerated in [Table 2]. Preoperative assessment and the usage of correct instrumental technique are highly recommended. The two steps for better management of mid-root curvature are adequate access and good coronal third preparation. This will ensure greater volume of irrigant to reach the mid-portion of the canal and allow instrumentation without any restriction and thus, create an ideal platform for the preparation of mid-root curvature. Once the coronal third portion of the canal is prepared, the mid-portion is prepared using precurved files. The bend given on the file should be gentle as sharp acute bends increase the probability of file fracture. The precurved file helps in negotiating the canal and makes a glide path before rotary NiTi files are introduced for cleaning and shaping.,
|Table 2: Relationship between the degree of curvature and incidence of ledge formation|
Click here to view
| Different Instrumental Techniques|| |
The instruments used for canal preparation and instrumentation technique were first described by Fauchard. Edward Maynard is considered as the pioneer of endodontic hand instruments while Oltramare was the first to introduce rotary instruments for the preparation of root canal.,, Racer endodontic handpiece was the first one to be introduced that worked with vertical filing motion. Later on, Giromatichandpiece was introduced with a reciprocal 90° rotation. NiTi hand files familiarized by Walia et al. and NiTi rotary instruments with more flexible file were introduced for better preparation and to avoid mishaps during canal preparation. However, mechanical instrumentation remains an important phase of root canal treatment that should never be neglected. Several methods/techniques of canal instrumentation have been proposed.
Schilder  described the "concept of flow" and design objectives according to which the canal should be tapering with the apical foramen essentially as narrow as possible without any modification in its original position. Along with design objectives, he also emphasized the biological objectives suggesting the adequate removal of diseased tissue from the canal while making sure that the necrotic debris is not extruded from the apical foramen. Also, it was suggested that there should be sufficient space for irrigation and intracanal medicaments.
Many techniques for canal preparation have been described. [Table 3] shows a summary of the different instrumental techniques used in endodontics. Standardized technique, the first formal technique for canal preparation was described by Ingle. In this technique, it was recommended that each file should be introduced up to the full working length of the canals so that a taper could be created and the canals are then subsequently filled using a single cone of gutta-percha.
|Table 3: Summary of the different instrumentation techniques,,,,,,|
Click here to view
Roane  in 1970 described a new instrumentation technique for canals with severe curvatures. The technique was termed as the "balanced forced instrumentation technique." Different instrumental motions were carried out to balance the action and reactions that took place during the canal preparation with specially designed stainless steel and NiTi hand files with modified tips. In balanced forced technique, the instruments are placed in the canal using very light, inward clockwise rotation (1/4 turn). Once the file moves in the apical direction, a counterclockwise movement (1/2 turn) is given while holding the file with a slight inward pressure. Cleaning or removal of the debris is accomplished only by an outward clockwise motion with no pressure. This sequence of instrumentation is continued until the working length is achieved.
Circumferential filing and instrumentation of all walls are carried out equally during the root canal preparation. Hedstrom files are very effective for this technique. Anticurvature filing technique was first described by Abou-Rass and Jastrab. Using that technique, the files are directed away from the danger zone in molars and toward the bulkiest portion of the root structure. This technique is very useful in cases where there is a chance of strip perforation into the furcation. With this method, the dental practitioner maintains digital control over the endodontic instrument. The walls on the opposite side from the curve are instrumented more than the inner walls, resulting in a decrease of the overall degree of canal curvature. In severely curved canals, the instrument should be modified from certain specific sites to avoid overcutting from the outer curve in the apical region and from the inner curve in case of mid-root curvature.
Ideal canal preparation may not always be possible due to certain factors including complex root canal morphology, anatomical variations, microbiological variations, and iatrogenic mishaps. Endodontic mishaps are unfortunate and usually occur during endodontic procedures. They are either caused by the lack of skill, poor instrumental techniques, or due to complex and unpredictable morphology of the root canal. Weine et al., and Gliackman and Dumsha  were the ones who described the iatrogenic mishaps that occur during the root canal procedure. The most common complication occurring during poor instrumentation technique is the formation of the ledge. Ledge is actually an iatrogenic defect occurring at the outer surface of the walls of the canal during instrumentation, preventing access of the instrument toward the apex of the root. Since ledge formation hinders the instrumentation and chemical cleaning of the canals, it increases the probability of treatment failure and eventually results in periapical pathosis. Ledge can be formed due to a number of reasons that may include failure of the clinician to assess root canal curvature preoperatively, failure to use a precurved file, inadequate irrigation, use of endodontic files of greater diameter in a curved canal, inadequate technique, and failure to use root canal instruments in a sequential manner. In a study by Jafarzadeh et al., the frequency of ledge formation was found to usually increase if the canal curvature was greater than 20° and the mesiobuccal and mesiolingual canals are said to be more frequently involved than distobuccal or distolingual canals. The role of instrumentation technique and instrument material is also related to ledge formation and more incidences of ledge formation with reaming motion and step back technique have been reported.
Another common mishap is canal perforation that could be access cavity perforation, furcal perforation, or root perforation (cervical, mid-root, or apical). Perforations usually occur due to over instrumentation or forceful instrumentation. Cervical perforation occurs when not using Gates-Glidden burs properly or when large instruments are used for coronal flaring. The first sign that a clinician may encounter is bleeding in the floor that can be managed by filling the defect with mineral trioxide aggregate (MTA) and a temporary filling initially followed by permanent filling. Similarly, in case of a mid-root perforation, MTA may be used for the repair.
Apical perforation that is caused by using longer instruments can be recognized by bleeding or by sudden response from the patient. This defect is repaired by packing a small amount of MTA at the apex to form a barrier between the gutta-percha and the periapical area. Other iatrogenic mishaps include zip formation, strip formation, instrument separation, and damage to the apical foramen if correct instrumentation technique is not used.,
| Conclusion|| |
Root canal treatment can be very challenging for an endodontist due to complex anatomy and the presence of severe root curvatures that causes hindrance during ideal preparation of the canal. The curvature may vary from gradual curvature of the entire canal, sharp curvature of the canal near the apex, or a gradual curvature of the canal with a straight apical ending. S- shaped canals (double curvature) may also occur and success in negotiating these canals depends on the size and construction of the canal, degree of curvature, size and flexibility of the instrument, along with the skills of the operator. Therefore, preoperative assessment of the horizontal and vertical variations of the canals should be done and a proper instrumental technique is very necessary to avoid procedural errors. Moreover, hand instrumentation is a time-tested, easy, and economic method for root canal treatment but care must be taken during their use to avoid problems like ledge formation, creation of zip, transportation, and instrument breakage. In severely curved canals, the use of rotary NiTi files after making a glide path with hand stainless steel files is recommended.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Peter OA. Current challenges and concepts in the preparation of root canal system: A review. J Endod 2004;30:559-67.
Estrela C, Bueno MR, Sousa-Nets MD, Pécora JD. Method for determination of root curvature radius using cone-beam computed tomography images. Braz Dent J 2008;19:114-8.
De Moor RJ, Deroose CA, Calberson FL. The radix entomolaris in mandibular first molars: An endodontic challenge. Int Endod J 2004;37:789-99.
Mounce R. Negotiating challenging mid root curvature: Rounding the bend. Dent Today 2007;26:108.
Sonntag D, Stachniss-Crap S, Stachniss C, Stachniss V. Determination of root canal curvature before and after canal preparation (part II): A method based on numeric calculus. Aust Endod J 2006;32:16-25.
Sakkir N, Thaha KA, Nair MG, Jospeh S, Christalin R. Management of dilacerated and S- shaped root canals-An endodontic challenge. J Clin Diagn Res 2014;8:ZD22-4.
Mounce RE. New possibilities for managing severe curvature: The twisted file. Endo Turbine 2008;9-12.
Arai Y, Honda K, Iwai K, Shinoda K. Practical model "3DX" of Limited cone-beam X-ray CT for dental use. Int Congr Ser 2001;1230:713-8.
Moshiri M, Scarfe WC, Hilgers ML, Scheetz JP, Silveira AM, Farman AG. Accuracy of linear measurements from imaging plate and lateral cephalometric images derived from cone-beam computed tomography. Am J Orthod Dentofacial Orthop 2007;132:550-60.
Meena N, Kowsky RD. Applications of cone beam computed tomography in endodontics: A review. Dentistry 2014;4:242.
Patel S. New dimensions in endodontics imaging: Part 2. Cone beam computed tomography. Int Endod J 2009;42:463-75.
Scarfe WC, Levin MD, Gane D, Farman AG. Use of cone beam computed tomography in endodontics. Int J Dent 2009;2009:634567.
Bogle J. Endodontic treatment of curved root canal systems. Oral Health 2013;103.
Zhu Y, Gu Y, Du R, Li C. Reliability of two methods on measuring root canal curvature. Int Chin J Dent 2003;3:118-21.
Bürklein S, Schäfer E. Critical evaluation of root canal transportation by instrumentation. Endod Topics 2013;29:110-24.
Luiten DJ, Morgan LA, Baugartner JC, Marshall JG. A comparison of four instrumentation techniques on apical canal transportation. J Endod 1995;21:26-32.
Sonntag D, Stachniss-Crap S, Stachniss V. Determination of root canal curvature before and after canal preparation (part I): A literature review. Aust Endod J 2005;31:89-93.
Weine F. Endodontic Therapy. 3rd
ed. St. Louis: CV Mosby; 1982. p. 256-340.
Tikku AP, Pandey PW, Shukla I. Intricate internal anatomy of teeth and its clinical significance in endodontics: A review. Endodontology 2012;24:160-9.
Segal M. Managing curved canals: The straight-away and super glide path technique. Inside Dentistry 2008;4.
Castelluci A. Curved canals. Endodontics 2009;2:502-3.
Jafarzadeh H, Abbott PV. Ledge formation: Review of a great challenge in endodontics. J Endod 2007;33:1155-62.
Fauchard P. (1733) Tractat von den Zahnen. Heidelberg: Reprint Huthig-Verlag; 1984. p. 111.
Grossman LI. Endodontics 1776-1976: A bicentennial history against the background of general dentistry. J Am Dent Assoc 1976;93:78-87.
Bellizzi R, Cruse WP. A historic review of endodontics, 1689-1963, part 3. J Endod 1980;6:576-80.
Oltramare Plo¨tzliche Exstirpation der Zahnpulpa mittels einer durch die Bohrmaschine in Rotation versetzten Nadel. Dtsch Monatsschr Zahnheilk 1892;32:407-9.
Walia HM, Brantley WA, Gerstein H. An initial investigation of bending and torsional properties of Nitinol root canal files. J Endod 1988;14:346-51.
Hulsmann M, Peters OA, Dummer PM. Mechanical preparation of root canals: Shaping goals, techniques and means. Endod Topics 2005;10:30-76.
Schilder H. Cleaning and shaping the root canal. Dent Clin North Am 1974;18:269-96.
Greene KJ, Krell KV. Clinical Factors associated with ledged canals in maxillary and mandibular molars. Oral Surg Oral Med Oral Pathol 1990;70:490-7.
Lambrianidis T. Ledging and blockage of root canals during canal preparation: Causes, recognition, prevention, management and outcomes. Endod Topics 2006;15:56-74.
Ingle JI. A standardized endodontic technique using newly designed instruments and filling material. Oral Surg Oral Med Oral Pathol 1996;14:83-91.
Goerig AC, Michelich RJ, Schultz HH. Instrumentation of root canals in molar using step-down technique. J Endod 1982;8:550-4.
Carrotte P. Endodontics: Part 7. Preparing the root canal. Br Dent J 2004;197:603-13.
Ingle JI. Endodontics Mishaps. PDQ Endodontics. 2nd
ed. USA: People's Medical Publishing House-USA; 2009.
Roane JB, Sabala CL. Clockwise or counterclockwise. J Endod 1984;10:349-53.
Roane JB, Sabala CL, Duncanson MG Jr. The "balanced force" concept for instrumentation of curved canals. J Endod 1985;11:203-11.
Abou-Rass M, Frank AL, Glick DH. The anticurvature filing method to prepare the curved root canal. J Am Dent Assoc 1980;101:792-4.
Weine FS, Kelly RF, Lio PJ. The effect of preparation procedures on original canal shape and on apical foramen shape. J Endod 1975;1:255-62.
Weine FS, Kelly RF, Bray KE. Effect of preparation with endodontic handpieces on original canal shape. J Endod 1976;2:298-303.
Glickman GN, Dumsha TC. Problems in canal cleaning and shaping. In: Gutmann JL, Dumsha TC, Lovdahl PE, Hovland EJ, editors. Problem Solving in Endodontics. 3rd
ed. St Louis, MO: Mosby; 1997. p. 91-122.
Clem WH. Endodontics: The adolescent patient. Dent Clin North Am 1969;13:482-93.
[Figure 1], [Figure 2], [Figure 3], [Figure 4]
[Table 1], [Table 2], [Table 3]